IDN60232

Latest River Heights for Gloucester River at Bellevue

Issued at 06:38 AM AEDT Friday 24 October 2025

About river heights plots | About this Plot

Station details:Station Number: 560063 Name: Gloucester River at Bellevue

Data from the previous 4 days.

  Date/Time    Water Level (m)  
20/10/2025 08:020.78
20/10/2025 08:030.78
20/10/2025 09:270.77
20/10/2025 11:030.77
20/10/2025 12:070.76
20/10/2025 14:030.76
20/10/2025 17:030.76
20/10/2025 17:320.77
20/10/2025 20:030.77
20/10/2025 20:420.78
20/10/2025 23:030.78
21/10/2025 02:030.78
21/10/2025 05:030.78
21/10/2025 08:030.78
21/10/2025 08:320.77
21/10/2025 11:030.77
21/10/2025 11:420.76
21/10/2025 14:030.76
21/10/2025 17:030.76
21/10/2025 17:220.77
21/10/2025 20:030.77
21/10/2025 22:370.78
21/10/2025 22:370.78
21/10/2025 23:030.78
22/10/2025 02:030.78
22/10/2025 05:030.78
22/10/2025 08:030.78
22/10/2025 09:320.77
22/10/2025 10:370.76
22/10/2025 11:030.76
22/10/2025 14:030.76
22/10/2025 17:030.76
22/10/2025 20:030.76
22/10/2025 20:370.77
22/10/2025 23:030.77
23/10/2025 02:030.77
23/10/2025 04:370.78
23/10/2025 05:030.78
23/10/2025 07:520.77
23/10/2025 08:030.77
23/10/2025 09:370.76
23/10/2025 11:030.76
23/10/2025 14:030.76
23/10/2025 16:170.77
23/10/2025 17:030.77
23/10/2025 20:030.77
23/10/2025 23:030.77
24/10/2025 02:030.77
24/10/2025 02:370.78
24/10/2025 05:030.78

Data as Plot | Back to Bulletin

About this table

  1. The river height observations are real-time operational data, and received from a mixture of manual readings and automated telemetry systems.
  2. In most cases river heights are expressed in Local Gauge Height (LGH) which typically has a zero reading near the lowest water level reached during dry conditions. In many tidal areas, as well as for a few inland river gauges, river levels are stated in Australian Height Datum (AHD), which is approximately the height above mean sea level.
  3. The data is provided for flood warning purposes, and it is possible that some data will not be available during non-flood periods.
  4. Where provided, heights or depths above/below roads, bridges, dam spillways and weirs are given as a guide only.
  5. Where provided, Cease to flow (CTF) is the gauge height at which the river ceases to flow at a rockbar or weir.
  6. Most river height data is provided to the Bureau of Meteorology by other agencies. Use of these data is subject to the terms and conditions of the supplying organisations.
  7. Unless otherwise noted, all material on this page is licensed under the Creative Commons Attribution Australia Licence